DSS CONFIG options
From OMAPpedia
- make ARCH=arm menuconfig
- Use y to select, n to deselect
Use 'm' to select as a module spacebar to change between select- select as a module- deselect
- Device Drivers --->
Graphics support --->
<> Support for frame buffer devices [Select this]
<> OMAP2+ Display Subsystem support (EXPERIMENTAL) [Select this]
----> () VRAM size (MB) [Make this 20]
----> [] DPI support [Select this]
----> [] RFBI support [Select this]
----> [] VENC support [Select this]
----> [] HDMI support [Select this]
----> [] SDI support [Select this]
----> [] DSI support [Select this]
----> (0) Minimum FCK/PCK ratio (for scaling) [Let this be 0]
----> [*] Sleep 50ms before DSS reset [Select this]
----> [*] Sleep 20ms after VENC reset [Select this]
<*> OMAP2+ frame buffer support (EXPERIMENTAL) ---> [Select this]
[*] Debug support for OMAP2+ FB [Select this]
(3) Number of framebuffers [Make this 3]
OMAP2/3 Display Device Drivers --->
<*> Generic DPI Panel [Select this]
< > LG.Philips LB035Q02 LCD Panel [Select this]
<*> Sharp LS037V7DW01 LCD Panel [Select this]
<*> NEC NL8048HL11-01B Panel [Select this]
<*> Taal DSI Panel [Select this]
<*> TPO TD043MTEA1 LCD Panel [Select this]
<*> ACX565AKM Panel [Select this]
