Android build Platform Configuration

From OMAPpedia

Jump to: navigation, search
Android Logov2.jpg
How to get started building your own binaries for the Android OS on your OMAP Platform
Overview Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9

   

Step 7


This page describes how your OMAP platform should be connected/setup

Contents

[edit] Hardware Platform Setup

[edit] PandaBoard Configuration

PandaBoard Setup.png
Connections steps
  1. Connect USB keyboard and USB mouse
  2. Connect ethernet cable
  3. Connect serial cable or USB2serial adapter
  4. Connect display cable to the HDMI connection port
Additional Guides
  • OMAPvideo PandaBoard
  • Display connection option

[edit] Blaze sEVM4430

The pictures depict the Blaze sEVM4430 (front and back) and typical connections that will be used by most users.

For a higher resolution, click on the picture and click on it again on the next page.

Connect mini-B USB cable to J12 USB-to-Serial port
Connect other end of the USB cable to your PC.
Connect power supply to the Blaze sEVM4430.
SDcards and Ethernet cables can be plugged in as shown.


Note:

  • The picoDLP may or may not be present depending upon the model purchased.
  • Note the positions of the S2 and S3 switches on the back of the Blaze.
  • The battery does not need be connected when the power cable is used.
  • Refer to Omap Platform Support Tools on how to install the platform to a PC.



Blaze front.jpg Blaze back.jpg

[edit] Zoom OMAP34x / OMAP36x MDP

The picture depicts Zoom-II OMAP34x MDP / Zoom OMAP36x MDP with the Debug board and typical connections that will be used by most users.

Connect device to the debug board using the J1 socket on the top of the debug board.
Connect mini-B USB cable to J12 USB-to-Serial port, connect other end of the USB cable to your PC.
Connect power supply to the debug board. SDcards and Ethernet cables can be plugged as well.
Additionally, SDcards and Ethernet cables can be plugged in as seen in the picture.


Note: The battery does not need be connected when the debug board is used.


Zoom2setup.jpg



Left arrow1.png Android Logov2.jpg Right arrow1.png
Previous Home Next
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox