Test Cases and Test Execution User Guide
Test Execution Instructions
|Test Case ID||Test Case Name||Test Case Description||Validation Criteria||Executions Steps||Sample file|
|1||Boot||SD card contains Android filesystem and bootargs must be saved on Zoom2 NAND. Insert SD card on Zoom2, turn it on and system should boot up successfully.||Home screen and all its images/icons should be displayed correctly.||Turn Zoom2 on with SD card inserted.||NA|
|2||Audio Playback||User plays an audio file - Input from a file in [SD] is decoded with [AAC, 48 kHz, 128 kbps, Stereo] and rendered to the [Stereo headphone] at [44.1 KHz render frequency] configuration.||Play - Audio shall play without audible glitches||Launch Music player application -> click on Songs -> select audio file.||A_000396_AAC_48kHz_128kbps_hint.mp4|
|3||A/V Playback - MPEG4|| User plays Audio/Video clip from [SD]. The Audio and Video are simultaneously rendered with A/V synchronization.
The file is decoded using [MPEG4 Visual Simple Profile at level 5, D1 NTSC 30 fps, 8 Mbps] with [AAC 48 kHz, 128 kbps, stereo] and rendered to the [Primary LCD], while associated audio is decoded at [44.1 KHz render frequency] configuration through the [Onboard Stereo speakers].
|Seek forward - Audio can be mute, video can be distorted until play is resumed.||Launch Gallery application -> click on All Videos -> Click on the corresponding video thumbnail.||AV_000370_MPEG4_Visual_Simple_Profile_Level_5_D1NTSC_30fps_8Mbps_short_version_AAC_48Khz_128Kbps_stereo.3gp|
|4||A/V Playback - H264|| User plays Audio/Video clip from [SD]. The Audio and Video are simultaneously rendered with A/V synchronization.
The file is decoded using [H.264 Baseline Profile Level 3.0, D1 NTSC 30 fps, 4 Mbps] with [AAC 48 kHz, 128 kbps, stereo] and rendered to the [Primary LCD], while associated audio is decoded at [44.1 KHz render frequency] configuration through the [Onboard Stereo speakers].
|Play - Shall play synchronized audio/video without audible/visible distortion.||Launch Gallery application -> click on All Videos -> Click on the corresponding video thumbnail.||AV_000523_H264_BL30_D1NTSC_30fps_4Mbps_AAC_48kHz_128kbps_stereo_4m30s.mp4|
|5||A/V Record - MPEG4-D1NTSC||User records both video and voice. Captured video from [Primary camera] is previewed on [Primary LCD] and encoded with [MPEG4 Visual Simple Profile at level 5, D1 NTSC 30 fps, 8 Mbps] with audio is captured at [Software Codec's capture frequency] from [Microphone - stereo]. The outputs are stored to a [SD].||Shall record synchronized audio/video without audible/visible distortion.||Launch Camcoder application -> click on the red (REC) button and start recording video and audio (duration=1 min) -> Click on the thumbnail that corresponds to your recording.||NA|
|6||Image Capture - JPEG||User captures and stores the image. View to be captured is rendered to the [LCD, Landscape orientation]. User sets the [Auto Mode] on [Primary Camera, ISP enabled]. User activates [Mode 0: Single shot mode] with [Flash Off] and captures an image or images at [8 Mpixel] resolution, that are encoded with [JPEG Baseline Profile with embedded thumbnail generation] and stored to [SDHC].||Image should be capture without any distortion.||Press on "Camera" application -> take a picture by pressing on the bottom right corner button -> press on the corresponding thumbnail on the screen.||NA|
|7||Bluetooth||BT Pairing - remote initiated. Device is powered on and OS is fully booted. Local device is initialized and enter the PIN for the keyword "passkey". Initiate pairing with local device from the remote BT device||PASS if pairing is successful.||On home screen press "F1" and then push on Settings -> Press on "Wireless controls" -> Press on "Bluetooth" to enable it -> Press on "Bluetooth settings" -> Scan for devices -> Your device should appear on the list . Press on it to pair it -> Enter the corresponding passkey.||NA|
|8||WLAN||While connected to a [AP] network on [802.11b] using [WEP] and [WEP] the device downloads and renders a number of [HTTP] based web pages containing contect from [1 server].||File shall be downloaded and rendered successfully by the browser.||Click on "browser" -> press "F1" -> press "Go" -> type any URL and press "OK"||NA|