PandaBoard minimal-FS Download

From OMAPpedia

(Difference between revisions)
Jump to: navigation, search
(Downloading the minimal-FS Environment)
(Downloading the minimal-FS Environment)
Line 31: Line 31:
* Untar as root for best results.
* Untar as root for best results.
* Tested on Pandaboard Rev EA1, A1
* Tested on Pandaboard Rev EA1, A1
-
* [[PandaBoard_L24.9_Release_Notes|Release Notes]]
+
* [[PandaBoard_L24.9_Release_Notes|Release Notes]] - [https://gforge.ti.com/gf/project/omap_binrel/frs/?action=FrsReleaseBrowse&frs_package_id=186 Sources]
|-
|-
Line 42: Line 42:
* Tested on Pandaboard  Rev EA1, A1
* Tested on Pandaboard  Rev EA1, A1
* '''NOTE:''' HDMI and a thumb drive are optional for completing tests for HDMI/DVI output and testing the USB Host ports. Make sure you Thumb drive is connected prior to booting.  
* '''NOTE:''' HDMI and a thumb drive are optional for completing tests for HDMI/DVI output and testing the USB Host ports. Make sure you Thumb drive is connected prior to booting.  
-
* [[PandaBoard_L24.9_Release_Notes|Release Notes]]
+
* [[PandaBoard_L24.9_Release_Notes|Release Notes]] - [https://gforge.ti.com/gf/project/omap_binrel/frs/?action=FrsReleaseBrowse&frs_package_id=186 Sources]
|}
|}

Revision as of 17:45, 7 March 2012

EVEN MORE IMPORTANT: See Troubleshooting for up-to-date information and binaries. Information below is outdated.


minimal-FS
Setting up your Validation Environment on your OMAP Platform
Overview Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8

   

Step 1


Downloading the minimal-FS Environment

We have provided you with some binaries to start with. Download the environment with respect to your platform.

Platform Release Notes
PandaBoards L24.9-Pandaboard-minimal-rootfs
  • Contains root-fs, MLO, u-boot,bin, uImage
  • Untar as root for best results.
  • Tested on Pandaboard Rev EA1, A1
  • Release Notes - Sources
PandaBoard L24.9-Pandaboard-validation-fs
  • This rootfs is used to validate whether your board is functioning properly or not. Simply download and install this environment on you SD card.
  • Contains root-fs, MLO, u-boot,bin, uImage
  • Untar as root (If using gparted for partitioning the MMC card, do not forget to check the Boot and Iba flags in gparted tool, after creating partions)
  • Tested on Pandaboard Rev EA1, A1
  • NOTE: HDMI and a thumb drive are optional for completing tests for HDMI/DVI output and testing the USB Host ports. Make sure you Thumb drive is connected prior to booting.
  • Release Notes - Sources



Note: Release names are current releases used from TI. This name varies depending on distro.


Left arrow1.png Linux Logo.jpg Right arrow1.png
Previous Home Next
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox