PandaBoard Prebuilt Ubuntu binaries

From OMAPpedia

Revision as of 20:05, 29 July 2010 (edit) Orbarron (Talk | contribs) ← Older edit		Revision as of 20:11, 29 July 2010 (edit) (undo) Orbarron (Talk | contribs) Newer edit →
Line 13:		Line 13:
	* rootfs is loaded to second partition of SD card		* rootfs is loaded to second partition of SD card
	* bootargs are hard coded so Blaze platform will boot directly at power up		* bootargs are hard coded so Blaze platform will boot directly at power up
-
-	{|width="100%"
-	|
-	|align="center"|[[Image:Ubuntu_logo_small.jpg|link=OMAP_Ubuntu_Main|100px]]
-	|align="right"|[[Image:right_arrow1.png|link=SD_Configuration]]
-	|-
-	|
-	|align="center"|Home
-	|align="right"|Next
-	|}

---

Revision as of 20:11, 29 July 2010

Blaze Basic Ubuntu binaries

All pre-built binaries can be found at: https://gforge.ti.com/gf/project/omap_binrel/frs/

General information regarding pre-built binaries.

• Binaries were built from directions found under OMAP Ubuntu Main "Building your own binaries "
• Contains: bootloader (u-boot and MLO) and Ubuntu (UNE) basic rootfs

General flashing information:

• bootloader files are loaded to first partition of SD card
• rootfs is loaded to second partition of SD card
• bootargs are hard coded so Blaze platform will boot directly at power up