Installing Ubuntu 12.04 on Pandaboard with TI ppa

From OMAPpedia

(Difference between revisions)
Jump to: navigation, search
(Created page with "== Abstract == In this guide, I will describe how to install Ubuntu 12.04 LTS with the TI ppa update step by step. This guide targets beginners who are just getting started on ...")
 
(One intermediate revision not shown)
Line 12: Line 12:
* USB keyboard and mouse, 5V/4A power supply, HDMI cable
* USB keyboard and mouse, 5V/4A power supply, HDMI cable
-
 
+
== Steps ==
-
== STEPS ==
+
'''1. Download Ubuntu 12.04 Image'''
'''1. Download Ubuntu 12.04 Image'''
Line 78: Line 77:
* You need to force installation of new bootloaders through command:
* You need to force installation of new bootloaders through command:
  $ sudo /usr/sbin/flash-kernel --update-bootloader
  $ sudo /usr/sbin/flash-kernel --update-bootloader
 +
 +
== References ==
 +
https://groups.google.com/forum/?fromgroups=#!topic/pandaboard/7DLabw7amBg

Latest revision as of 20:09, 12 November 2012

Contents

[edit] Abstract

In this guide, I will describe how to install Ubuntu 12.04 LTS with the TI ppa update step by step. This guide targets beginners who are just getting started on the Pandaboard.

Note:- This guide will work with the Pandaboard ES as well.

[edit] Prerequisites

[edit] Steps

1. Download Ubuntu 12.04 Image

Please visit the link below:

http://cdimage.ubuntu.com/releases/12.04/release/

Now download the Texas Instruments OMAP4 (Hard-Float) preinstalled desktop image.

2. Preparing the SD card

Now insert your SD card into the computer but make sure that it is not mounted. Now, identify the correct raw device name (like /dev/sde - not /dev/sde1). You can do this by opening disk utility in Ubuntu and clicking on the sd card. Now navigate to the folder where you have downloaded the image using the terminal. Type the following code into the terminal to write the image to the sd card:

zcat ./ubuntu-12.04-preinstalled-desktop-armhf+omap4.img.gz |sudo dd bs=4M of=/dev/sdb 
sudo sync 

This will take some time. If the process is successful, you will see the cursor jump to the next line and text input will be available. Now remove the sd card.

3. Bootup the Pandaboard

Connect the HDMI/DVI cable to the monitor and the Pandboard. Also connect your mouse, keyboard to the pandaboard. Now, power up the Pandaboard. If all went well, you should see a familiar Ubuntu installation screen.

4. Installing Ubuntu 12.04 on Pandaboard

The installation procedure is quite simple. You just have to follow the on screen instructions. Mind you,this process will take a very long time and hence be patient.

5. Installing the TI ppa update

   $ sudo su -
   # export http_proxy=<your proxy if any>
   # export https_proxy=<your proxy if any>
   # add-apt-repository ppa:tiomap-dev/release
   $ sudo apt-get update
   $ sudo apt-get dist-upgrade
   $ sudo apt-get install ubuntu-omap4-extras
   # On Panda 4430: 
   $ /usr/bin/alsaucm -c Panda set _verb HiFi 
   # On PandaES 4460: 
   $ /usr/bin/alsaucm -c PandaES set _verb HiFi

Open /boot/boot.script file and make the change mentioned below:

Please replace "vram=40M mem=456M@0x80000000 mem=512M@0xA0000000" or any vram or split mem settings with: "mem=1G@0x80000000"

Example of the bootargs I am using:

fatload mmc 0:1 0x80000000 uImage
fatload mmc 0:1 0x81600000 uInitrd
setenv bootargs ro elevator=noop console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 fixrtc splash
bootm 0x80000000 0x81600000
$ sudo /usr/sbin/flash-kernel --update-bootloader

[edit] References

https://groups.google.com/forum/?fromgroups=#!topic/pandaboard/7DLabw7amBg

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox