Enabling Ethernet Port

From OMAPpedia

Revision as of 15:44, 25 May 2010 by Hari s (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Ethernet support is already built into the default Kernel configuration provided by Texas Instruments. To double check if ethernet is set in the kernel configuration, look in the .config file in the Kernel root directory and check that the following is set to "y":

CONFIG_INET 
IP_PNP 
CONFIG_IP_PNP_DHCP 
CONFIG_NET_ETHERNET 
CONFIG_MII 
CONFIG_SMC911X 

If Ethernet and networking configurations are not enabled properly, then use the menu config to enable it. To enter menu config, type "make menuconfig" in the Kernel root directory. Follow the following to enable:

Networking supportàNetworking optionsà 
  TCP/IP networking 
  IP: kernel level autoconfiguration 
  IP: DHCP support 
Device DriversàNetwork device supportàEthernet (10 or 100Mbit)à 
   Generic Media Independent Interface device support 
   SMSC LAN9115678 support

[edit] Checking the Bootargs

Once you have a proper kernel image, ethernet and TCP/IP should be operational. To get a valid DHCP add "ip=dhcp" to the u-boot bootargs environment variable, i.e.

 setenv bootargs 'console=ttyS3,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=256M ip=dhcp init=/init'

With the ip variable set in the bootargs, the kernel will use DHCP during boot-up to grab IP address from the DHCP server. Once this variable is set, the kernel will block until it detects a valid connection.

[edit] Checking the Android Properties

To get the Android browser to resolve address names, set the DNS server property. In either the ADB or COM shell, give the following command: “setprop net.dns1 xxx.xxx.xxx.xxx” where xxx.xxx.xxx.xxx is the IP address to your DNS server.

Note: If you are behind a proxy, then at the time this article was written we have NOT found a method to set the proxy server for the Android browser to use. We have tried using "setprop net.eth0.http-proxy hostname:port" and "setprop net.gprs.http-proxy hostname:port", but neither could get us through the proxy. Also, the option of adding an entry of (99,'http_proxy','hostname:port") to the 'system' and 'secure' tables in the /data/data/com.android.providers.settings/databases/settings.db database has also been tried, but failed.

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox