Android Target Device configuration

From OMAPpedia

Revision as of 23:53, 17 June 2010 by Ccd admin (Talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Configuring the Target Device (Zoom)

For instructions on how to setup the Zoom hardware, refer to Platform Configuration

Connect the Target board to PC

To setup Zoom2 to display debug messages via Teraterm/Hyperterm on a PC, connect and configure the below.

Connect a USB cable (mini-B connector) to the J12 receptacle and the other side to the USB port on PC. Windows PC should recognize the USB to serial device connection as "USB Serial Converter A".

For instructions on how to configure this, refer Platform to PC

Retrieved from "http://www.omappedia.com/wiki/Android_Target_Device_configuration"
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox