Android Target Device configuration

From OMAPpedia

(Difference between revisions)
Jump to: navigation, search
(Created page with '__NOTOC__ =Configuring the Target Device (Zoom)= For instructions on how to setup the Zoom hardware, refer to [http://omappedia.com/wiki/Platform_Configuration Platform Configur…')
 
(5 intermediate revisions not shown)
Line 1: Line 1:
__NOTOC__
__NOTOC__
-
=Configuring the Target Device (Zoom)=
+
==Configuring the Target Device==
-
For instructions on how to setup the Zoom hardware, refer to [http://omappedia.com/wiki/Platform_Configuration Platform Configuration]
+
For instructions on how to setup the Zoom/Blaze hardware, refer to [[Platform_Configuration|Platform Configuration]]
-
==Connect the Target board to PC==
+
==Connecting the Target board to PC==
-
To setup Zoom2 to display debug messages via Teraterm/Hyperterm on a PC, connect and configure the below.
+
* To setup Blaze with Teraterm/Hyperterm, configure as below, and use COM 11 (3rd port out of the 4 ports discovered) to set up the terminal.
 +
* To setup Zoom2 to display debug messages via Teraterm/Hyperterm on a PC, connect and configure the below.
-
Connect a USB cable (mini-B connector) to the J12 receptacle and the other side to the USB port on PC. Windows PC should recognize the USB to serial device connection as "USB Serial Converter A".  
+
Connect a USB cable (mini-B connector) to the J12 receptacle and the other side to the USB port on PC. Windows PC should recognize the USB to serial device connection as "USB Serial Converter A". For instructions on how to configure this, refer [[Support_Tools#Installing_USB_to_Serial_on_PC|Platform to PC]]
-
For instructions on how to configure this, refer [http://omappedia.com/wiki/Support_Tools#Installing_USB_to_Serial_on_PC Platform to PC]
+
 
 +
==Next step==
 +
Continue with "Getting Android binaries" from the [[OMAP_Android_Main|main page]].
[[Category:Android]]
[[Category:Android]]

Latest revision as of 16:35, 29 July 2010


[edit] Configuring the Target Device

For instructions on how to setup the Zoom/Blaze hardware, refer to Platform Configuration

[edit] Connecting the Target board to PC

Connect a USB cable (mini-B connector) to the J12 receptacle and the other side to the USB port on PC. Windows PC should recognize the USB to serial device connection as "USB Serial Converter A". For instructions on how to configure this, refer Platform to PC


[edit] Next step

Continue with "Getting Android binaries" from the main page.

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox